Instructions:

1) Remove pop up components from the transit case.
2) Locate frame and expand to fullest extent making sure that the hanging pips are at the top of the frame.
3) Lock frame arms to make the frame rigid (see pic)
4) Locate magnetic bars and fix vertically to the face of the pop up frame including the reverse of the frame at the ends (to hang "D end panels" on)
5) Take out your graphics panels or fabric panels and put them in order. Begin from one end of the frame and locate the top of the panel to the frame using magnetic pips at top of panel and frame.
6) Once the panel is fixed at the top fix the edges on the panel to the magnetic bars (already clipped on the pop up frame) using the pre-applied magnetic tape.
7) Line up graphics one ata atime to produce a seamless mural.
8) Attach the halogen lighting kit to the rear of the pop up frame. You will need to attached the cantilever fixing directly on the scissor joint of the top horizontal pop up bars. the lights will then hang over the front of the face securely.
9) The pop up case can be used as a counter if you have ordered the case to counter conversion kit.

POD hope you enjoy your product. Have a nice day!